Jl. Interchange Cikampek Barat No.6 Dawuan Tengah, Cikampek - Karawang
Email: info@indogress.com
Phone: (0264) 310708
Fax: (0264) 310709
Surface: Crystalline
Sizes:
60/60, 30/60
Nominal | 30 x 60 | 60 x 60 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thickness (mm) | 9.4 – 9.8 | 9.4 – 9.8 | ||||||||
Weight/Box (kg) | 22.6 ± 0.2 | 30.0 ± 0.4 | ||||||||
Box/Pallet | 36 Box | 48 Box | ||||||||
Pallet/Container | 20 Pallet | 20 Pallet | ||||||||
In the production prices, there is no shade variation. Produced by raw natural raw materials come with color and size variations in the same batch and over batch to batch. Therefore manufacturers limit the amount of shade variation in the carton box by sorting the tiles coming from the production line.
Tiles have a harmonious shade and texture with low minimal variation
Tiles have a moderate variation in shade and texture
Tiles have a slight variation in shade and texture
Tiles have a random or substantial variation in shade and texture, and each piece of tile may be in shade to one another
Dimension & Surface Quality : Surface Quality Length and Width Thickness Straightness Of Sides Rectangularity Surface Flatness – Center Curvature – Edge Curvature – Warpage |
ISO 10545 – 2 |
. Min. 95% Free from defects Max ± 0.6 % Max ± 5 % Max ± 0.5 % Max ± 0.6 % . Max ± 0.5 % Max ± 0.5 % Max ± 0.5 % |
. No visible defects ± 0.1 % ± 2.5% ± 0.1 % ± 0.1 % . ± 0.1 % ± 0.1 % ± 0.1 % |
Physical Properties Water Absorption Breaking Strength Modulus Ruptures Deep Abrasion Resistance Surface Abrasion Resistance Thermal Expansion Thermal Shock Resistance Frost Resistance Coefficient of Friction |
ISO 10545 – 3 ISO 10545 – 4 ISO 10545 – 5 ISO 10545 – 6 ISO 10545 – 7 ISO 10545 – 8 ISO 10545 – 9 ISO 10545 – 10 ISO 10545 – 17 |
E ≤ 0,5 % Min. 1300 N Min. 35 N/mm² Max. 175 mm³ Manuf. to state abrasion IMax. 9.10 x 10-6.K-1 No Visible Defects Frost Proof – |
E ≤ 0,05 % ≥ 2100 N ≥ 45 N/mm² ≤ 110 mm³ Min. PEI Class 3 ≤ 7. 10-6.K-1 No Visible Defects Resistance Oil / Wet Ramp ( Min R9) |
Chemical Properties Resistance of staining Resistance of chemical |
ISO 10545 – 14 ISO 10545 – 13 |
Min. Class 3 Min B |
Class 5 A |
Note :
– General Product Specifications are subject to change without prior notice
– General Product Specifications refer to Glazed and Unglazed Tile
– Not recommended installation of grout ( joint spacer ) less than 2 mm
– Rustic and cutting product, recommended to instal grout ( joint spacer ) at least 3 mm
– Color in Brochure will be different with actual